"Painting" 40K Space Marines with Sharpie Pens - Completed Land Speeder

A few weeks ago I started to assemble and paint a Build+Paint Land Speeder for the small Sharpie-painted Ultramarines force.

Over the weekend I completed the Land Speeder, and I think it turned out well for the time and effort spent.  The last few steps were to dip the model, apply the decals, glue in the drive and gunner, re-apply dipping media over the decals.  I finally applied a matte spray to tone down the reflection of the dipping media to complete the model.

There are a few touch-ups needed to be made with a fine Sharpie pen, (in areas where I still see some blue where it shouldn't be). As a proof of concept, it was a success.  The metallic Sharpie pens worked great and saved a ton of time painting those colors.

I probably won't paint any miniatures solely with Sharpie pens alone going forward, but for models with some metallic colors, I'll be sure to pull out the Sharpies - at least for easy to mark areas.

"Painting" 40K Space Marines with Sharpie Pens - Build+Paint Land Speeder

After I painted a small contingent of Space Marines with Sharpies, I decided to pickup a Build+Paint Land Speeder to attempt the same quick, basic paint job.

Below is the work in progress, showing the model primed and then after less than an hour of work with the Sharpies.  I decided to give the Land Speeder some battle damage to match the scars on the Dreadnought.  This was achieved by outlining silver splotches with black ink.

I'm hoping to paint the flesh color on the Space Marine's face this weekend, then dip the model soon afterwards.  As usual before dipping, it looks like garbage at this stage.  However, dipping should tone down the stark contrast that the pens achieve, give the colors some depth, and create a better overall effect.  I'm still curious to see how the finished model will look without a terrain base like the rest of the Space Marines.

Warhammer 40K - 8th Edition Battle Report: Ultramarines vs. Hive Fleet Kraken

Strom and I recently tried out our first game of Warhammer 40,000 8th Edition.  It had been a while since we last played, but with our large selection of fully painted armies we decided that the classic matchup of the Ultramarines and Hive Fleet Kraken would be a great introduction to the new rules.

We decided on using the new Power Levels and decided on Power 40 for the size of the battle.  Strom took a good mix for a classic Ultramarine force - a Tactical Squad, a Dreadnought, Terminators, and a Landspeeder.  I selected a force focused on a Tervigon with lots of Gaunts, along with some Tyranid Warriors and a Carnifex.

I brought over my winter table for the battle.  We setup the terrain and decided that a 3x3 battle area would work well for us to test out the rules and based on the size of our forces.

Our first 8th Edition battle was fast, easy to play, and fun.  Unfortunately, the Tyranids did not fare so well, with only a few Tactical Space Marines being defeated.  My Tyranid Warriors and Carnifex did the worst, getting fully wiped out in hand-to-hard without even causing more a single wound on the Terminators.  In the end, my remaining model, the Tervigon, did manage to destroy the Dreadnought with its Smite power, just prior to losing its last wound.

The new rules use Datasheets, which make for a quick and easy reference for a unit's stats, weapons, and abilities.  The fixed "to hit" rolls speed up the game, without losing much from gameplay.

In all, the game was fun and stream-lined compared to older versions of Warhammer 40,000.  We're excited to try out more games using our different painted armies.

"Painting" 40K Space Marines with Sharpie Pens - Ultramarines from Battle for Vedros

Based on a short Youtube video from Lukes Affordable Painting Service (APS), I was curious to see how quickly I could "paint up" Ultramarines from the Battle for Vedros Starter Set using only Sharpies.

I first primed the Space Marines with The Army Painter's Ultramarine Blue.  I then proceeded to "paint" the miniatures via Sharpie pens, afterwards dipping the models.  Unfortunately, the dipping media did dissolve some of the pen marks, so I had to reapply after dipping.  The colors white and red were a pain.  For red, I first had to color the spot white, then add the red afterwards.  I also had to use flesh paint for the faces (Sharpie doesn't make a flesh-color pen).

To see how cheap I could paint them, I decided to try out a cheap acrylic paint for the base.  I now know why good acrylic paints are so important.  Even after more than five coats I could still see some of the original color underneath.

The crackle paint I used did not work very well for the bases, and the only noticeable crackle effect was on the Dreadnought's wide base. 

I have never been good with decals, and the Ultramarine ones were the worst.  The bunched up and generally look poor, especially with the frost effect that decals can sometimes get.

Ultramarines were a good candidate for this method due to their blue color scheme and gold trim.  I found coloring the cape white, then coloring it red was a waste of 25 minutes.  I think the Dreadnought turned out the best of all the models.

I just purchased a Build+Paint Landspeeder that I will quickly paint using the same method.  I'm curious to see how quickly I can complete it using the lessons learned from these models.